Cleaning Hard-to-Reach Spots

How to Clean Inside the Vacuum Cleaner Hose: Step-by-Step

Easily clean inside your vacuum cleaner hose with E-Cloth. Simple, effective steps for spotless results—no harsh chemicals needed.

Shop Now

Easily clean inside your vacuum cleaner hose with E-Cloth. Simple, effective steps for spotless results—no harsh chemicals needed.

Reviewed by Zac Kieffer

President at E-Cloth

Updated August, 12

A Clean You Can See

Our high-performance microfiber products simplify cleaning, making it quick, easy, and effective, so you can enjoy visible results without the fuss. No streaks, just results.

How to Clean Inside the Vacuum Cleaner Hose: Step-by-Step

- E-Cloth
- Mild dish soap
- Bucket
- Warm water
- Towel or drying rack

 

Detach and Inspect the Hose

 
  • Disconnect the hose from your vacuum cleaner. Give it a quick visual check to see where dust and grime have built up.
 

Shake Out Loose Debris

 
  • Take the hose outside and firmly shake it to dislodge any loose dirt or dust trapped inside.
 

Flush with Warm Soapy Water

 
  • Submerge the hose in a bucket of warm water mixed with a few drops of mild dish soap. If the hose is long, you can slowly run water through it as you move it back and forth.
 

Rinse Thoroughly

 
  • Empty the soapy water and run clean warm water through the hose until all soap residue is gone.
 

Dry Completely

 
  • Hang the hose in a well-ventilated area with both ends open. Allow it to air dry fully before reconnecting to your vacuum cleaner to prevent any mold or odors from developing.
 

Safety Precautions

  • Unplug the vacuum before detaching the hose to avoid electric shock.
  • Wear gloves to protect your hands from sharp debris or residue inside the hose.
  • Avoid using harsh chemicals—stick to mild dish soap to prevent hose damage.
  • Do not use hot water (just warm), as excessive heat can warp or weaken the hose material.
  • Ensure the hose is completely dry before reattaching to prevent mold growth and electrical hazards.
  • Check for blockages with a broom handle or similar tool, but never use sharp objects that could puncture the hose.

How to Maintain Cleanliness Inside the Vacuum Cleaner Hose: Extra Tips

Regular Visual Inspections

 
  • Make a habit of checking the hose for signs of blockages or wear before each use.
  • Look for dust buildup or loose particles that could hinder airflow.
  • Inspect the hose bends and joints to ensure they are free from crumpled debris.
 

Shake Out and Beat the Hose

 
  • After vacuuming, take the hose outside and give it a good shake to dislodge any trapped particles.
  • Gently beat the hose against a hard surface to help knock around any stubborn debris.
  • This quick routine can drastically improve performance and airflow.
 

Use Compressed Air or a Brush

 
  • Blast compressed air through the hose to push out accumulated dust and particle build-up.
  • If compressed air isn’t available, use a long, flexible brush to scrub away the debris from the inside.
  • Ensure the spray or brush is gentle enough to avoid damaging the hose material.
 

Regular Deep Cleaning Routine

 
  • Set aside time monthly to clean the hose more thoroughly by using a mild detergent mixed with warm water.
  • Submerge the hose if possible or run the solution through it, then rinse out completely.
  • Allow the hose to dry thoroughly before reconnecting to prevent any mold or mildew formation.
 

Common Mistakes When Cleaning Inside the Vacuum Cleaner Hose

Not Unplugging and Cooling Down

  • Ensure the vacuum is completely unplugged before starting to clean the hose to avoid any accidental power-on.
  • Allow the machine to cool if it has been working for a while, as the hose can be hot and may cause burns.

Using Harsh Chemicals or Too Much Moisture

  • Avoid using harsh cleaning agents that can degrade the inner lining of the hose.
  • Steer clear of saturating the hose with water; limited moisture is best to prevent damage and mold.

Failing to Dry Thoroughly After Cleaning

  • Ensure the hose is completely dry before reattaching it to the vacuum to prevent mold and mildew buildup.
  • Air-dry the hose in a well-ventilated area, or gently towel dry to remove excess moisture.

An E-Cloth is a simple way to reach and clean under the bed slats effectively.

E-Cloth is committed to delivering a clean you can see—effortlessly erasing messes with just water for a spotless shine, free of streaks and added chemicals.

Read More

How to Clean Behind Wall-Mounted Shelves: Step-by-Step

Easily clean behind wall-mounted shelves with E-Cloth. Discover a simple, effective method for spotless results in those hard-to-reach spots.

How to Clean Behind the Radiator Pipes: Step-by-Step

Easily clean behind radiator pipes with E-Cloth. Discover a simple, effective method for spotless results—no harsh chemicals needed.

How to Clean Behind the Kitchen Faucet Base: Step-by-Step

Easily clean behind your kitchen faucet base with E-Cloth. Simple steps for spotless results—no harsh chemicals needed.

How to Clean Inside Closet Floor Corners: Step-by-Step

Discover simple, effective tips for cleaning inside closet floor corners using E-Cloth—no harsh chemicals, just spotless results every time.

How to Clean Under the Refrigerator Meat Drawer: Step-by-Step

Easily clean under your refrigerator meat drawer with E-Cloth. Simple steps for a spotless, hygienic kitchen—no harsh chemicals needed.

How to Clean Inside Dryer Lint Trap Housing: Step-by-Step

Easily clean your inside dryer lint trap housing with E-Cloth. Simple steps for a thorough, effective clean—no harsh chemicals needed.

Read All

Experience Real Cleaning

A Clean You Can See

E-Cloth Window Cleaning Kit

Blue Liquid Glass Cleaner